When using a cargo lift, the following points should be noted:
1. Before use, the load should be confirmed to avoid overloading. Be sure to adjust safety protection devices and height limiters according to the requirements specified in the manual to ensure their normal operation and compliance with the required standards; At the same time, check whether the connections of each component are firm and reliable, and strictly prohibit any looseness (such as the tightness of screws and bolts). If any abnormal situation is found during operation, it should be stopped and repaired in a timely manner to ensure the safety and stability of the equipment. During the homework process, it is necessary to have someone to supervise and not leave the post to avoid accidents. If necessary, corresponding emergency measures should be taken to reduce losses and prevent accidents from happening. When carrying out maintenance or cleaning, the power should be turned off first and the guardrail door should be locked after the machine has completely landed before carrying out relevant maintenance and cleaning work to ensure that personal and property are not harmed; For lubrication parts, it is necessary to regularly replace the oil and grease deposits that have been worn down to ensure the flexibility of the operating parts. Damaged parts should be repaired and replaced in a timely manner to prevent accidents; Attention should also be paid to foreign objects entering the internal structure of the body and causing accidents and fatalities. The 25 ton electric four column lifting platform is prohibited from continuously rising for a long time during use. Due to its own gravity, exceeding a certain height can leave safety hazards and easily cause accidents such as falling objects from high altitude. Therefore, after use, the forks should be lowered to a lower position for storage to reduce the risk factors. In addition, it is necessary to strictly follow the instructions and relevant regulations in the manufacturer's product manual to ensure the safety of the equipment and itself; At the same time, it is important to pay attention to the installation and maintenance of electrical equipment, strictly follow the operating procedures of electricians, and enhance self-protection awareness. Having a correct understanding and high vigilance from an ideological perspective is the key to all major responsibilities. These precautions should be taken into consideration when moving heavier items. To protect oneself and also consider the health of others, one must act with caution!
3. Sufficient workspace is required for operators to correctly place and control vehicles and other equipment, as well as respond to any emergency situations that may occur. 4. Be careful not to change the parts of the electrical system or mechanical equipment without proper training and certification. The above are a few important tips and suggestions about cargo elevators, hoping to be helpful to you! In addition, it should be noted that if you encounter problems that cannot be solved, please stop using it immediately and contact personnel for inspection and handling in a timely manner to minimize risks and improve safety to the greatest extent possible!.
